13
External Connection
Connecting VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.
Following the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each
VCR has a different back panel configuration. When connecting a VCR, match the color of the
connection terminal to the cable. We recommend the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT In terminal on the back of the VCR.
3. Connect an RF cable between the ANT OUT terminal on the VCR and the ANT IN terminal on
the TV.
4. Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO IN jack on
the TV.
5. Connect audio cables between the AUDIO OUT jacks on the VCR and the AUDIO L/R jacks
on the TV.
•
If you have a mono (non-stereo) VCR, use a Y-connector (not supplied ) to hook up to the
right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
VCR Rear Panel
RF Cable (Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
