Naxa NT-2500, Инструкция по эксплуатации

Страница: 7 / 16

AC 100-240V~
50/60Hz AC 100-240V~
50/60Hz
IN
R L
Pb CVBS/Y
IN
Pr
COAX
OUT
PC AUDIO VGA
HDMI
RF
USB
(5V
500mA)
POWER INPUT
DC
12V
General Description
Installing Batteries in the Romote Control
Antenna connection
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Batteries should last for 1 year under normal use.
If you do not intend to use the remote control for a long period of time, remove
the batteries to prevent damage due to leakage.
Do not use old and new batteries together.
The batteries or battery pack shall not be exposed to excessive heat such as
direct sunlight, fire, or other heat sources.
Installing Batteries
1
Open the battery compartment
cover on the back side.
2
Insert two AAA batteries inside the battery
compartment with their + and – ends
aligned as indicated. Do not mix old and
new batteries or different types of
batteries.
3
Close the cover.
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Antennas with 300ohm flattwins Leads Antennas with 75ohm Round Leads
External Connection