Naxa NT-2500, Инструкция по эксплуатации

Страница: 11 / 16

Input Source
TV
AV
HDMI
VGA
15 16
1.
Insert the power cord plug into a polarized AC outlet.
2.
Press button on remote control or
STANDBY
button on the LED TV.
3.
Normal picture will be displayed on the screen after 6 seconds. If no signal input,
"No Signal" will be displayed on the screen.
4.
If temporary POWER off is required, press button on remote control or
STANDBY
button on the LED TV.
5.
If you want to completely switch off the power for this unit, unplug the power cord
from the electrical outlet
.
6.
After switching off the unit,
do not turn
on the TV again
for
at least 5 seconds
.
Status indication lamp
No light: In power on mode.
Red: In standby mode.
Auto power off
If there is no signal input in TV mode, the TV will automatically access the standby state
in
approximately 1
0 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized
after
turning off the
unit.
After restarting
, the unit will work according to the mode set before being turned off.
How to turn the TV on or off