radio before attempting to pair
another device.
AUX Input Mode
Connect any audio device equipped with a
standard headphone jack (or 3.5 mm line out)
to the radio.
Use a 3.5 mm audio patch cable to connect the
headphone jack of your device to the AUX IN
jack found on the back of the radio.
1.
Prepare the radio. Press c!> until the dis
play reads AUX, then press
v-
to lower
the volume level.
2. Prepare the audio device. Start playback
on the device, then set the volume level
of the device to approximately 80% of its
www.naxa.com
maximum.
3. Adjust the fmal volume on the radio. Use
the
v-
and
v+
buttons to set the volume
to a comfortable level.
CD
Use the audio device to control
playback (e.g., stop, play, next).
Use the radio to control the vol
ume.
Charging Your USB
Devices
Use the USB cable provided by your device
manufacturer to connect the device to the
USB charge ports on the side of the radio. USB
cables may differ by manufacturer, so be sure
to use the one provided with your device.
Page 13
