Naxa NPB-268, Инструкция по эксплуатации

Страница: 18 / 24

Page 18 Naxa Electronics
Using the AUX Input
Listen to devices connected to the AUX input jack [24].
Press FUNCTION [10] to change the active source mode
to AUX. The LCD screen [21] will display AUX.
1. Connect the audio source to the player. Use an
optional audio patch cable to connect the 3.5mm
headphone or line-out jack of the audio source to
the 3.5mm AUX Input jack [24] found on the front
of the player.
2. Lower the volume on the player. Press VOL– [14] to
lower the volume level.
3. Prepare the audio source. Start playback on the
device. Set the volume level of the device to ap-
proximately 80% of its maximum.
4. Adjust the final volume. Press VOL+ or VOL– on the
player to set the volume to a comfortable level [13,
14].
ѥ L
Use the audio source to control playback
(e.g., stop, play, next). Use the player to
control the volume.