Naxa NPB-268, Инструкция по эксплуатации

Страница: 11 / 24

www.naxa.com Page 11
output jack [25]. Once connected, press VOL+ or VOL– [13,
14] to slowly adjust the volume to a comfortable level.
ѥ L
The speakers will be disabled when head-
phones are connected.
ѥ
ѥ
Using headphones for prolonged periods or
at a high volume can damage your hearing
permanently.
Using the Radio
Listen to FM or AM radio broadcasts.
Press FUNCTION [8] to change the active source mode
to Radio. The FM or AM indicator will light on the LCD
screen and the station frequency will be displayed.
Tuning to Radio Stations
• Press the /BAND button [7] to select the AM or FM
radio band.
• Tune to a station by pressing SKIP+ or SKIP– [11, 12].
The station frequency is shown on the LCD screen.
• Scan to the next station by briefly holding SKIP+ or
SKIP– [11, 12].
• To tune to a preset station, press PROG [8]. While
the current preset station number is shown on the
LCD screen (e.g., P01), press SKIP+ or SKIP– [11, 12]
to change the preset station.
ѥ L
The ST indicator on the LCD screen will light
when the tuner is locked in on an FM stereo
signal.