Naxa NPB-266, Инструкция по эксплуатации

Страница: 15 / 22

www.naxa.com Page 15
AUX-In Operation
1. Connect the audio source to the boombox. Use a
3.5mm audio patch cable (not included) to connect
the 3.5mm output jack of the audio source to the
3.5mm AUX Input jack [9] found on the top of the
boombox.
2. Prepare the boombox. Press the /FUNC. button
[15] to select “AUX” mode, then lower the volume
level (press the button [11]).
3. Prepare the audio source. Start playback on the
device, then set the volume level of the device to
approximately 80% of its maximum.
4. Adjust the final volume on the boombox. Use the
[11] or [13] button to set the volume to a com-
fortable level.
⚠ L
Use the audio source to control playback
(e.g., stop, play, next). Use the boombox to
control the volume.