Naxa NPB-266, Инструкция по эксплуатации

Страница: 11 / 22

www.naxa.com Page 11
3. Close the CD door (make sure it clicks into place).
The display will flash “READING”, then playback
will start from the first track.
4. To remove a disc, press the /M–/ID3 button [20]
to stop playback. Make sure the disc stops spinning
completely, then press PUSH TO OPEN to open the
CD compartment lid. Grasp the disc by its edges
and take it out carefully.
⚠ L
Make sure the disc has stopped spinning
completely before opening the CD DOOR
To ensure good performance, wait until the
system has completely read the disc before
proceeding with other functions.
The display will show “NO DISC” if no disc is
loaded or if the disc is unreadable.
Lower the handle [6] before opening the CD
compartment. A raised handle will prevent
the CD compartment door from opening
completely.
Playing a Disc
1. To start, pause, or resume playback, press the /
M+/ button [17].
2. To stop playback, press the /M–/ID3 button [20].
Selecting a Desired Track/Passage
To select a desired track:
• Press the /TUN.– [18] or /TUN.+ [19] button
until the desired track appears on the display.
To search for a particular passage during playback
• Press and hold the /TUN.– [18] or /TUN.+ [19]
button to quickly scan through the current track.
Release the button to return to playback at normal
speed.
To select a track number above 10 (for MP3 discs only):
• Press the FOLD./10+ button [12] to skip forward 10
tracks.
To select a desired folder (for MP3 discs only)