Naxa NKM-100, Инструкция по эксплуатации, Страница: 8 / 22

Page 8 Naxa Electronics
Connecting Power
This unit can operate on AC 120 V, 60 Hz power.
With the included AC power cable, connect the AC
Power in socket [28] found on the rear of the unit to a
wall power outlet that provides AC power.
⚠
⚠
This unit supports AC 120 V power only.
Do not connect the unit to a power source
other than that which is indicated here and
on the label as this may result in the risk of
fire or electric shock.
Do not handle the power plug with wet
hands. Doing so may cause electric shock.
Connecting the Microphones
To start using the microphones, use the included cables
to connect then to the system.
1. Align the 3 pins found on the bottom of the mi-
crophone with the XLR end of the cable. Insert the
cable and push until it clicks.
2. Connect the 6.35 mm plug of the cable to the MIC 1
or MIC 2 input connectors found on the front of the
system [9, 3].
3. When you are ready to use the microphones, set
the switch on them to the ON position.
⚠ L
Microphone holsters can be found on
either side of the system. Flip them down
to reveal a convenient place to hold the
microphones when they are not in use.
Connecting to a TV
This unit can play CD+G karaoke discs. Karaoke CD+G
discs typically contain both CD-audio tracks and syn-
chronized song lyrics. You will need to connect the ka-
raoke system to a TV in order to view the song lyrics.
The composite video connection is capable of sending a
standard-definition video signal to a TV.
1. Make the composite video connection with the yel-
low plug of the supplied A/V cable [26].