Naxa NKM-100, Инструкция по эксплуатации, Страница: 11 / 22

www.naxa.com Page 11
Playing a Disc
• To start, pause, or resume playback, press [18].
• To stop playback, press [21].
Selecting a Desired Track/Passage
• To select a desired track, press or [22, 20] un-
til the desired track appears on the display.
• To search for a particular passage during playback,
press and hold or [22, 20] to quickly scan
through the current track. Release the button to
return to playback at normal speed.
Programming Tracks
Programming tracks of disc are possible when play-
back is stopped. Up to 20 tracks can be programmed to
play in any order.
1. While playback is stopped, press PROGRAM/PAIR
[15] to enter program mode. The Program indicator
will light up.
2. While the display is flashing, use the or but-
tons [22, 20] to select a track.
3. Press PROGRAM/PAIR [15] to save the selected
track to the program. The display will flash the
next program track number.
4. Repeat steps 2 & 3 to store other desired tracks
until all desired tracks have been programmed.
5. Press [18] to start playing the custom program;
press [21] to cancel program playback.
To clear the program from memory, press [21] when
the disc is stopped or open the CD door.
Repeat Play Modes
Control the order in which tracks are played by chang-
ing the repeat play mode. Press REP [19] during play-
back in order to cycle through the different modes; the
repeat indicator will light up when a repeat mode is ac-
tive.
To cancel repeat play mode and return to normal play-
back, press REP [19] until the repeat indicator darkens.