6
Meanwhile you have to turn off host mode in the setting menu.)
9. Power Switch ON/OFF:
Switch this knob to turn on/off the device.
10. Earphone jack:
3.5 mm standard earphone jack.
11. DC jack:
Connect the power cable to charge the device.
12. HDMI jack
THE FIRST TIME TO USE DEVICE
1. Battery management and charging
Before use this device, please charge it fully.
1.1 Put the charger/adapter into the DC jack, the device will start to charge.
1.2 Charge for 10 hours for the first two charging, later charge should last 2.5 hours
every time. A full charged battery pack can be used about 2 hours.
- When it is charging, the icon of battery will be rolling.
- When charging has finished, the icon of battery will turn green and stop rolling.
- For prolonging the device’s usage life span, please use up the remain electrical
quantity in first two times using.
- Once you will not use this device for a long time, please power it off.
[NOTE]:
1. This device has a built-in polymer battery, when it is charging, supplied charger is
only available.
2. If you do not use this device for a long time, please charge and release once in a
month.
3. If the device is very low power, it may display <low power> to indicate that the
device needs to charge for several minutes before you can use it.
4. The built-in polymer battery should be charged regularly. Such damage caused by
battery over-consuming is not included in the quality warranty.
2. Turn on/off the device:
Press and hold button will turn on/off this device. Please reference by: the
description of MAIN UNIT in page 5.
3. Connect with PC:
You can connect with PC by USB cable attached with the device.
- In the USB mode, add or delete any files in the device are available.
[NOTE]: 1. When the battery is low, device will power off automatically.
2. Shutdown illegally, when you restart, device would scan and repair the disk.
The screen will stay at the progress bar for a long time.
