Page 10
Page 5
During MP3/WMA file in disc, MMC/SD or USB mode:
1) In TRACK SEARCH mode, the LCD will display TRK T 000 and flash the biggest
digit 0 that the SD/MMC card or USBstick contain. (if the number of tracks is
less than 100 and more than 9, it will be TRK 00) Then press the VOL+ or VOL-
button to select the number of the flashing digit from 0 ~ 9. Then press SEL
button to confirm the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press SEL button to play the track of
the selected serial number.
2) In FIRST CHARACTER SEARCH mode, the LCD will display A--......, If there
are files names its first character are A , the ......is the first file name its first
character is A by the order of A~Z and 0~9; otherwise, the ......is NONE. Then
press the VOL+ or VOL- button to select file
’
s first character by the order of
A~Z and 0~9. Finally press SEL button to play the selected file.
3) In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is
not the root folder, it will find a root folder named ROOT). Then press the VOL+
or VOL- button to select your desired folder and then press >> | or |<< button
to select your desired track in the folder. Finally press SEL button to play the
selected track.
20. ST/MO BUTTON
In FM mode, press the ST briefly to select stereo or mono sound mode.
21.CLK BUTTON
Press the CLK button briefly to display time for 5 seconds on the display, and
then returns to its previous display unless the button is pressed again.
Then press the CLK button and hold for more than 1 second until the real time
flashes on the display. Then you can adjust HOUR or MINUTE by press the
VOL+ or VOL- button.
22.AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can
connect any matched external audio device to this socket. Use the volume
knob to adjust volume.
23.SD CARD SLOT
In order to play the file in the MMC/SD card, insert the MMC/SD card into
the MMC/SD card slot. The system will change into the MMC/SD mode
automatically, and then play the first file in the MMC/SD.
Note:
When MMC/SD card and USB stick are both inserted into their slot or socket,
the system will change into the playback mode of the latter one.
24.USB SOCKET
In order to play the file in the USB stick, turn over the plastic cover cap then
insert the USB stick into the USB socket. The system will change into the
USB mode automatically, and then play the first file in the USB.
When no needing to do USB operation, please cover the plastic cover cap.
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
UNIT CHASSIS
PLASTIC TRIM RING
FRONT PANEL
DASHBOARD
METAL MOUNTING SLEEVE
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
NOTE
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
Remove the two screws that protect
the CD player during transportation
before operating the player.
To attach the removable faceplate, insert the
left side of the faceplate into the left of the
CD player chassis first. Then push the right side
of the faceplate into the chassis until you hear
it
“
click
”
.
