5
10
Radio Operation:
1. To select radio band
In RADIO mode, press the BAND button shortly and repeatedly to select your desired radio
band in sequence and circulation as follows:
-->FM1-->FM2-->FM3-->MW1-->MW2-->
2. To select the radio station manually or automatically
Press >>| or |<< button to automatically search up or down. It will play when finds the station.
Press >>| or |<< button and hold for about 2 seconds to enter MANUAL searching mode.
Then press >>| or |<< button repeatedly to manually search up or down for your desired
station from the current frequency.
3. To store the current station or turn on the preset station
In RADIO mode:
A) Press one of 1-6 number buttons and hold for about 1 second to store the current station
in the preset memory bank of the number button for the current band.
B) Press one of 1-6 number buttons to turn on the preset station stored in the preset memory
bank of the number button for the current band.
4. To automatically store for the strongest stations and scan for each stored stations
A) Press A.P button and hold for about 1 second, it will search from the current frequency
and check the signal strength until 1 cycle search is finished on current band. And then 6
strongest available stations will be preset to the corresponding preset numbers. When
the Auto-storeage operation is completed, it will execute the Preset Scan continuously.
B) Press the A.P button to scan all preset stations in the memory of the current band and
stay on each memory stations for about 5 seconds.
To stop preset scan, press this button again.
Ò É
Ä Ñ
½ â
³ ý
Care For Using CD's:
About CD-R/CD-R/W discs:
In addition to commercially-recorded audio CD's, this unit can play CD-R and
CD-R/W discs. In come cases, particularly when recorded on older CD burners,
some CD-R and CD-R/W discs may not play. Also, whenever you are recording
a CD for playback in this receiver, it is recommended that you record at 24x or
slower speed for CD-R and 4x or slower for CD-R/W to achieve higher signal
quality and better playback performance.
Do not attach any sticker or adhesive tape on the disc.
Handle the disc by its edge to keep the disc clean and do not touch the surface.
. Insert
a disc with labelled surface up, or it will damage the unit.
3. Do not expose the disc to direct sunlight or nearby heat sources such as
heating vents, caliduct which can cause the disc to warp.
Do not leave disc in a car if it is parked in direct sunlight as that will lead to a
considerable rise in the temperature inside the car.
4. Do not use any secondhand or rented disc, usually, there is glue on the
surface of those discs, it will stop the unit working and damage it.
5. Always store the disc in its case for protection. Scratched up discs will produce
poor sound performance and cause CD player to skip.
6. In raining day or wet area, the moisture may form on the disc or the optical
parts, The playback may not be possible. If moisture forms on the disc, wipe it
off with a soft cloth. If moisture forms on the optical parts of the unit, allow the
unit to sit for about one hour with power on.
7. Do not use solvents such as benzine or thinners. Commercially available
cleaners or anti-static spray will damage the unit.
1. To keep the disc clean:
Before playing a disc, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc outwards from the disc centre.
2. When one has already been inserted. Doing so may damage the unit