background image

Remark

:

1. In addition to normal audio CD, this unit can play CD-R and CD-R/W disc
    that contain audio tracks as well; however, depending on the conditions of 
    the recording equipment, recording program or the CD-R as well as CD-R/W 
    disc itself, some CD-R or CD-R/W may not play.

2. When making music CD with CD-R or CD-R/W disc, too high recording speed
    may result in poor signal quality and therefore, it is recommendable to select
    24x or lower speed for CD-R recording and 4x or lower speed for CD-R/W 
    recording.

1

!

                     

Caution:

       

Although the purpose of applying this Bluetooth system is trying to minimize

       the risk of traffic accidence which may take place providing that the driver is 
       engaged in telephone conversation during driving, it might not absolutely 
       prevent the occurrence of serious traffic accidence. Manufacturer of this 
       product is not in the position to responsible to any traffic accidence or problem
       induced due to the application of this Bluetooth system.

       When the product suffered by the transients or surges, it would be loss of function.
       In order to restore the function of the product, it is necessary to take off the front
       panel and press reset button two times.

BATTERY INFORMATION OF  REMOTE CONTROL

Replace Battery in Remote Control:

Note about the Battery of Remote Control:
1. 

3. Do not short the battery. 
4. Do not throw the battery into the fire.
5. To avoid the risk of accident, keep the battery out of reach of children.

1. Before using the remote control for the first time, pull the insulating sheet out
    of the remote control as the direction indicated by the arrow.(see fig.1)
2. Press the movable block hold as the direction indicated by the A arrow(See
    fig.2), then pull the battery holder out of the remote control as the direction
    indicated by the B arrow(see fig.2).
3. Replace the old battery by a new battery with (+) polarity side upward.
    (See fig.3).
4. Insert the battery holder to the original position in remote control(See fig.3).

Improper use of battery may cause overheating or explosion. so that result in

    injury or fire .
2. Battery leakage may cause damage to the remote control.
    (Battery Life: 6 months with normal use in normal room temperature).

A

B

Fig.1

Fig.2

Fig.3

+ side up

Содержание NCA-692









Отзывы: