Naxa NAS-3081, Инструкция по эксплуатации

Страница: 4 / 12

Page 4 Naxa Electronics
Connecting Power
Your speakers has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully
to ensure optimal performance and battery life.
Use the included USB charging cable to connect the
speakers to a USB power source to charge the battery.
• Connect the small end of the cable to the DC 5V
USB charge port [5] of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
The Status LED will light red when the battery is charg-
ing. When charging is complete, the Status LED will
turn off.
⚠
⚠
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
⚠ L
It takes approximately 4 hours to charge
the unit fully when connected to a stan-
dard USB port.
Using Bluetooth
®
Mode
Pairing a Device with Bluetooth
®
A device must be paired with the speakers before using
them together for the first time.
Make sure Bluetooth is enabled on your device before
attempting to pair it.
1. Press and hold until the speakers emits a tone
to indicate that it is in Paring Mode. The Status LED
will flash blue rapidly.
2. Use your device to search for nearby Bluetooth de-