Naxa NAS-3080, Инструкция по эксплуатации

Страница: 7 / 16

www.naxa.com Page 7
Using Bluetooth
®
Mode
Pairing a Device with Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
Make sure Bluetooth is enabled on your device before
attempting to pair it.
Set your speaker to Bluetooth mode (press and hold
. The speaker will automatically search for a paired
device. If it finds a paired device, it will connect to it
automatically, and you’re ready to play music from
that device.
If it does not detect a paired device, it will switch to
Pairing mode (the Status LED will [10] flash blue and
the speaker will announce “The Bluetooth device isr
ready to pair”). When the speaker is in Pairing Mode,
it will announce itself to nearby Bluetooth devices and
accept pairing requests from them.
1. The speaker will announce itself as “NAXA NAS-
3080.” Use your device to search for nearby Blue-
tooth devices. (This function is usually in the
Bluetooth settings menu; refer to your device’s in-
struction manual to learn more.)
2. Select the speaker from the list of found devices.
3. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the speaker will announce “The Bluetooth device has
connected successfully” and the Status LED [10] will
blink blue slowly.
L L
If the pairing process fails, turn the speaker
off, set the speaker to Bluetooth mode, and
then repeast steps 1-3.
Make sure that the volume of your device is
set to its maximum level; use the speaker to
adjust the volume to a comfortable level.
The speaker cannot be paired with more
than one device at a time.