Page 10
Naxa Electronics
When the speaker is in MP3 Music Player mode:
To do this...
...do this
Start, pause, or resume audio
playback
Press
.
Skip to the previous track
Press
Skip to the next track
Press
.
Decrease the volume level
Hold
.
Increase the volume level
Hold
.
L
⚠
Do not remove memory cards from the
speaker while the speaker is on. Doing so
may damage the speaker system or mem-
ory card.
Using AUX Input Mode
Connect devices without Bluetooth
®
by using the AUX
connection. The included 3.5mm AUX adapter is re-
quired to make this connection.
1. Connect the 3.5mm plug of the included AUX adapt-
er to the device’s headphone or line-out jack.
2. Connect the small micro USB plug to the DC 5V port
of the speaker [1].
3. Press and hold
to switch the speaker to AUX
Input mode.
4. Turn on the device. Lower the volume on both the
device and speaker.
5. Set the device volume to 80% of its maximum and
then start playback.
6. Press and hold to gradually increase the volume
of the speaker to a comfortable level.
L
L
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.
Содержание NAS-3080
Страница 16: ......