Naxa NAS-3058, Инструкция по эксплуатации

Страница: 4 / 14

Page 4 Naxa Electronics
Connecting Power
Your speakers have an integrated rechargeable bat-
tery. Upon initial use, the battery should be charged
fully to ensure optimal performance and battery life.
Use the included USB cable to connect the speakers to
a USB power source to charge the battery.
• Connect the small end of the cable to the USB
charge port [6] of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
⚠
⚠
The battery used in this device may pres-
ent a fire or chemical burn if mistreated.
Do not disassemble, incinerate, or heat the
battery. Do not leave the battery in a place
subject to direct sunlight, or in a car with its
windows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
The Status LED [4] will light a steady red when the bat-
tery is charging.
⚠ L
It takes approximately 2 hours to charge
the unit fully when connected to a stan-
dard USB port.
Turning the Speakers
On & Off
To turn the speakers on, press and hold the POWER
button [5] until the Status LED [4] flashes blue.
To turn the speakers off, press and hold the POWER
button [5] until the Status LED [4] stops fashing blue.
⚠ L
If the speakers are not paired with a Blue-
tooth
®
device within 5 minutes, they will
turn off automatically to conserve power.