Naxa NAS-3048, Инструкция по эксплуатации, Страница: 5 / 14

www.naxa.com Page 5
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
When you turn on the speaker, it will automatically
search for a paired device. If it does not detect a paired
device, it will switch to Pairing mode (the Status LED
will flash blue quickly). Then:
1. Make sure Bluetooth
®
is enabled on your device.
Enable it if it hasn’t.
2. Use your device to search for available Bluetooth
devices. (This function is usually in the Bluetooth
settings menu; refer to your device’s instruction
manual to learn more.)
3. The speaker will announce itself as “NAXA NAS-
3048.” Select it from the list of devices.
4. If your device asks for a passcode, use “0000” to
complete the pairing process.
The speaker will provide an audio alert when the
speaker is paired and connected to a device.
L L
Make sure that the volume your device is
set to its maximum level.
The speaker cannot be paired with more than
one device at a time.
Using the Speaker
When the speaker is connected to a Bluetooth® device:
To do this... ...do this
Start, pause, or resume audio
playback Press .
Skip to the previous track Press .
Skip to the next track Press .
Decrease the volume level Press and hold .
Increase the volume level Press and hold .
Answer or end a call when con-
nected to a smartphone Press .
Change the active source mode Press and hold
.