Naxa NAS-3048, Инструкция по эксплуатации, Страница: 4 / 14

Page 4 Naxa Electronics
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the cable to the DC 5V
USB charge port of the unit. (The 3.5mm plug is not
used for power.)
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
L L
The Power LED will light a steady red when
the speaker is charging. It will turn off
when the speaker is fully charged.
L
⚠
The battery used in this device may pres-
ent a fire or chemical burn if mistreated.
Do not disassemble, incinerate, or heat the
battery. Do not leave the battery in a place
subject to direct sunlight, or in a car with its
windows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
To turn the speaker on, set the ON/OFF switch [3] to the
“ON” position. The status LED will flash blue quickly.
To turn the speaker off, set the ON/OFF switch [3] to
the “Off” position.