NavRoad RECO2, Руководство пользователя

Страница: 83 / 140

First steps
First start
1. First start may require touch screen calibration.
2. Then you will have to choose the language (this setting does not affect language setting in
your navigation software).
3. To use navigation, SD card with software and maps is required. This card should be inserted to
card reader in the device. There is only one way to insert the card. Do not remove the card
when the navigation software is running. To remove the card, press it’s top to release the latch,
than slide it out
Determining the current position
Before you start your journey, wait for determining your current position. During first start it may
require few minutes. During subsequent runs, your position will be determined much more quickly.
Your location will be shown on the map.
Battery
Battery in the device does not require formatting. Avoid complete discharging, as it has influence on
battery efficiency. To charge the battery, an optional AC charger may be used, with charging current
like on a devices’ name plate. To charge the device in a vehicle, car charger should be used, with one
end connected to the device, the other to the cigarette lighter socket.
USB cable delivered with device is not able to charge the device.