Page 9
3.0 PRODUCT CARE AND MAINTENANCE
PRODUCT CARE
This Navpixel™ NPS1535 Marine Display has been designed to provide optimum
performance and service without any required scheduled maintenance other than
occasional cleaning.
Disconnect the Monitor from the power source before cleaning the Monitor,
Touch Screen or unit’s enclosure.
Do not use abrasive cleaners or solvent-based (flammable) cleaners on the
Flat Panel or Touch Screen Display, its enclosure or any other electrical
device (cables, power cord, etc)
．
Do not use paper products as they may scratch the display screen, and
．
Do not directly apply cleaning solutions to the display screen.
WARNING!
CAUTION!
DISPLAY SCREEN CLEANING
• A vinegar-based cleaner is preferred to prevent streaking and degradation of the
coatings, or
• A non-abrasive glass cleaner such as a professional foam glass cleaner
• Apply the cleaning solution to a soft clean cloth, dampening slightly
• Keep a fresh side of the cleaning cloth towards the screen surface to avoid scratching it
with accumulated grit, and
• To minimize the risk of abrasion to the screen, air drying is recommended.
TOUCH SCREEN
Touch Screen Cleaning
• Use a special screen cleaning tissue or a solution specifically antistatic coatings. Follow
the manufacturer’s instructions,
• Lightly dampen a soft clean cloth with water or a general detergent solution
• Keep a fresh side of the cleaning cloth towards the screen scratching it with
accumulated grit, and
• To minimize the risk of abrasion to the screen, air drying
Panel PC Enclosure
• Clean the unit enclosure with a soft clean cloth lightly dampened purpose mild
detergent solution
• To rinse, wipe down with clean water, and
• Dry with a soft clean cloth.
Long-term Storage
• For long-term storage, it is suggested the unit be stored in a normal indoor
environment
and the display glass be protected from accidental damage
• For pedestal mount units, disconnect the cable(s) and loosen the arm adjustment to a
point where the ball can be removed from the arm, or
