Page 18
9.0 Driver Installation
Insert the driver CD, please follow the sequence below to install the drivers.
Follow the sequence below to install the drivers:
Step 1 – Install INF Driver
Step 2 – Install VGA Driver
Step 3 – Install LAN Driver
Step 4 – Install Audio Driver
Step 5 – Install SATA Driver
USB 2.0 Drivers are available for download using Windows® Update for both Windows®
XP and Windows® 2000. For additional information regarding USB 2.0 support in
Windows® XP and Windows® 2000, please visit
www.microsoft.com/hwdev/usb/
.
Please read instructions below for further detailed installations.
Installation:
Insert the CD into the CD-ROM drive. And install the drivers from Step 1 to Step 4 in
order.
Step 1 – Install INF Driver
1. Click on the Step 1-inf folder and then double click on the setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the Step 2-vga folder and choose the folder your system is
2. Double click on .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 3 – Install LAN Driver
1. Click on the Step 3-LAN driver folder
2. Select the Windows folder and then double click on Autorun.exe
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 4 – Install Audio Driver
1. Click on the Step 4- AC97 folder and choose the folder your system is
2. Double click on .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Note:
Under the Window OS environment, if the CRT connector is connected to display panel
PC by the data switch device, the user need to set the color and resolution from Intel
Graphic utility (VGA driver) instead of setting from the control panel in case of the
wrong display appearance.
