Navon m502, Руководство пользователя

Страница: 30 / 91

30
①
Make the battery metal contact completely
contact with the battery compartment metal
contact, and then push the battery to inset the
phone.
②
Put the battery cover on.
Warning: remove battery previous must turn off your cell
phone. It is forbidden to boot or have other external
power of connection directly take out the battery, or
possible damage to the SIM card and a mobile phone.
Battery charging

Plug the charger connector with the phone, and plug
the charger into the electrical outlet.
 At this time the charge level icon will repeatedly flash
at the top right corner of the mobile phone’s screen; If
the mobile phone charging while power off, a
charging indication will appear on the screen. If the
mobile phone was used even after there was
insufficient power, it might take some time after
having begun charging until indication of charging
appears on the screen.
When the battery level icon does not flash anymore, this
means that the battery is fully charged. If charging while
power off, there will still be an indication on the screen when
the charging is complete. This process usually takes more
than 2.5 hours(The first three times you recharge, you’d
better keep 12-14 hours, as this will help extend battery
life).The mobile phone and charger will become warm during
charging and this is normal.
 When charging is complete, unplug the charge
connector from the electrical outlet and the mobile
phone.