6
5. Select [
Internet Protocol Version 4 (TCP/IPv4)
] and click on [
Properties
].
6. Fill the IP fields as shown below.
7. Click on [
OK
] to confirm and close two windows on Step 6 and 5.
Note: It can take up to 20 seconds for the new IP to be recognized. A popup window on the bottom right corner should
show when the IP is correctly set. Turn OFF any Firewall that could prevent data to be exchanged between NavNet and
the PC. You may also have to restart your computer.
IP address: “172.31.3.50”
Subnet mask: “255.255.0.0”