NAVMAN
TRACKER 5507/5607
Installation and Operation Manual
9
1-2 Cleaning and maintenance
The 5507/5607 screen is covered by a proprietary
anti-reflection coating. To avoid damage, clean
the screen only with a damp cloth and mild
detergent when dirty or covered in sea salt.
Avoid abrasive cleaners, petrol or other solvents.
If a plug-in card gets dirty or wet, clean it with a
damp cloth or mild detergent.
To optimize performance, avoid walking on or
jamming cables and connectors.
Push the dust cover over the display when the
5507/5607 is turned off.
The NAVMAN 5507/5607 is a compact, rugged,
highly integrated marine chartplotter. It is easy to
use and has an easy to read color display. Complex
functions can be performed with a few key
presses, taking the hard work out of boating.
This manual covers:
5507/5607
Color display, external GPS antenna.
The available functions, displays and setup
menus depend on the optional sensors and
instruments that are installed:
1 The Fuel functions require optional
petrol/gasoline, diesel or SmartCraft™ fuel
sensors to be installed and set up.
2 SmartCraft™ engine functions require a
SmartCraft™ system to be installed. For
information on using SmartCraft™, see the
1-1 Overview
SmartCraft™ Gateway Installation and
Operation Manual.
3 The 5507/5607 can send data to other
instruments, such as an autopilot, and receive
data from other instruments.
4 AIS functions require an optional AIS receiver
to be installed.
For information on installing options, see section
16-2.
This manual describes how to install and operate
the 5507/5607. Special terms are explained in
Appendix C. For maximum benefit, please read
this manual carefully before installing and using
the unit. For more information on this instrument
and other NAVMAN products, go to our website,
www.navman.com.
1-3 Plug-in cards
The 5507/5607 can use two kinds of plug-in card:
1 C-MAP™ chart cards
have chart details
required for navigating in a particular
region. When a chart card is plugged in, the
extra details automatically appear on the
5507/5607 chart window.
The 5507/5607 can use NT, NT+, NT-MAX and
NT-MAX2 cards.
2 C-MAP™ user cards
are used to store
navigation data. Each user card expands the
5507/5607 memory and allows the data to be
transferred to another 5507/5607 easily (see
section 12).
Note:
The older 5 volt user cards are not
supported.
1 Introduction