21
MDT 860 || User Manual
If a PIN number that is ALREADY IN USE by another driver has
been entered
The
Driver ID Status pop up screen will appear with ‘Log on Failed! You are already logged on’.
Press any key on the MDT 860 to exit the screen.
The
Driver ID Log On screen will reappear to request a valid log on. Contact your office immediately to ask
the Fleet Operator to re-confirm the Driver PIN and/or check why the Driver PIN is in use.
How to log off
Select
Driver Options from the Main Menu (or press F5).
Select Log off from the menu.
The
Driver ID Log Off screen will appear.
Press
P
to confirm log off OR press the
O
key to cancel the action.
If Driver Status* is activated
, the driver must select a status before log off can occur.
*The Driver Status feature is only visible on the MDT 860 if it has been activated. This feature is not available
in all the regions.
Note:
If the Driver ID is logged off, but the vehicle’s ignition has not been turned off, the
Driver ID Log On
screen will reappear requesting a valid log on.
How to change driver status*
Select
Driver Options from the Main Menu (or press F5).
Select Driver Status from the menu.
Use the 4-way cursor key to select the correct status.
Once highlighted press
P
to confirm the Driver Status.
*The Driver Status feature is only visible on the MDT 860 if it has been activated. This feature is not
available in all regions.
6
. D
riv
er
O
pti
on
s
Содержание MDT 860
Страница 1: ...User Manual MDT 860 GPS Tracking and Fleet Management Solutions...
Страница 2: ......
Страница 4: ......
Страница 36: ...MN000498A Lat 36 48 422 S Lon 174 44 480 E...