20
How to log on
The
Driver ID Log On screen will appear on the MDT 860 immediately after the ignition is turned on.
Using the numeric keypad enter the complete Driver PIN.
Press
P
to confirm the Driver PIN. The MDT 860 will then send the PIN number back to the OnlineAVL
application for checking. Confirmation may take a few minutes depending on cellular network coverage.
If the vehicle is out of coverage
If the vehicle is out of cellular coverage when inserting the Driver PIN, the Halo Qube tracking device will
store the information and will send it when the vehicle is back in cellular coverage.
If a CORRECT DRIVER PIN has been entered
The
Driver ID Status pop up screen will appear with details of the driver’s name.
Press any key on the MDT 860 to exit the screen.
If an INCORRECT DRIVER PIN has been entered
The
Driver ID Status pop up screen will appear with ‘Log on Failed’.
Press the
O
key to exit the screen.
The
Driver ID Log on screen will reappear to request a valid log on.
Содержание MDT 860
Страница 1: ...User Manual MDT 860 GPS Tracking and Fleet Management Solutions...
Страница 2: ......
Страница 4: ......
Страница 36: ...MN000498A Lat 36 48 422 S Lon 174 44 480 E...