Red = +12/24 V Battery
Tax Disk Antenna
Pink = ignition “ON”
(NOT Accessories)
Black = Ground
5
Halo QUBE 2
|
Installation Manual V1.0
Quick Install - 3-Wire Basic Tracking
Power Connection
Wire Colour
Function
Description
Red
+12/24 V
Main Power Connection - Connect to fused supply
Pink
Ignition
Positive input from vehicle when the key is in the IGNITION
position (not the accessory position). This signal must
remain on DURING starting of the vehicle - Connect to a
fused supply.
Black
GND
Vehicle ground / chassis connection
Note: Please individually insulate any bare ends that are not connected.
Recommended Mounting
• Under the driver or passenger’s seat.
• In or under the dash.
• In the boot / trunk area.
• Where it is not excessively hot.
• Where it is dry.
• Where there is not excessive vibration.
• Should allow MDT/ PDT connection.
• Should allow the diagnostics LED’s to be seen
• Should allow suffi cient clearance to plug and unplug the connectors while mounted.
Status LED Indicators
LED
Display
State
Normal
Operation
Description
Power
On
Power ON, Unit awake
Slow Flash
Sleep mode
Off
No Power -
Note: The Qube 2 should always be powered.
GPS
On
GPS fi x
Off
No GPS fi x
GPRS
On
Data connection to cellular network
Off
No data connection
