NavLinkz RL4-MIB2-E18, Руководство пользователя

Страница: 6 / 27

Version 24.02.2021 HW CAM(V100) / (V35, V36, V40) RL4-MIB2-E18
P
a
g
e
6
1.5.
Dip-switch settings
1.5.1. 8 dip - black
Some settings have to be selected by the dip-switches on the
video interface.
Dip position down is ON and position up is OFF.
* The front camera will automatically be switched for 10 seconds after disengaging the
reverse gear 8see following information).
1.5.1.1. Activating the front camera input (dip 1)
If set to ON, the interface switches for 10 seconds from the rear-view camera to the front
camera input after having disengaged the reverse gear. In addition, a manual switch-over to
the front camera input is possible via keypad (short press) from any image mode.
Description of the front camera power supply
: see chapter “Power supply output”.
1.5.1.2. Enabling the interface’s v ideo inputs (dip 2-3)
Only the enabled video inputs can be accessed when switching through the interface’s video
sources. It is recommended to enable only the required inputs, disabled inputs
will be skipped when switching through the video-interfaces inputs.
1.5.1.3.
Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory picture while the reverse gear is engaged to
display factory rear-view camera.
If set to ON, the interface switches to its rear-view camera input
„ Camera- IN“ while the
reverse gear is engaged.
Dip Function ON (down) OFF (up)
1 Front camera enabled * disabled
Power supply
output
(red wire)
+12V (max. 3A) when reverse gear
is engaged incl. 10 seconds delay
and +12V by manual switching to
front camera by keypad
+12V (max. 3A) ACC
2 CVBS AV1-input enabled disabled
3 CVBS AV2-input enabled disabled
4 No function Set to OFF
5 Rear-view cam type after-market factory or none
6
No function
Set to OFF
7
Monitor adjusment
Try all 4 possible combinations of dip 7 and 8 to find the
best picture (quality and size)
8