Version 02.12.2022
HW:CAM(V100)/(V33)
RL4-MIB
P
a
g
e
18
2.6.3.
After-market front camera
The red power supply output
ACC/front cam out 12V (max 3A)
can be used to power
a front camera. If Dip 1 is set to ON (black 8 dips), the power supply output gives
+12V (max 3A) when reverse gear is engaged incl. 10,15 or 20 seconds delay after
reverse gear is disengaged (depending on menu adjustments, see chapter
“picture setting and guide lines”).
Note: In addition, a manual switch-over to the front camera input is possible via keypad (short
press) from any image mode. The power supply output gives +12V then, as well (if Dip 1 is set
to ON and the front camera input is selected).
Attention: A longer press of the external keypad push button will switch the interface to the
next source!
