Version 25.06.2019
HW: CAM(V98)/UP(V20)
RL4-MIB-HA
P
a
g
e
4
Requirements
Brand
Compatible vehicles
Compatible systems
Audi
A1 (GB) since 11/2018-
Q3 (F3) since 08/2018-
MMI Radio Plus or MMI Navigation Plus with MMI
Touch und 8.8 or 10.1inch monitor
Limitations
Video only
The interface inserts ONLY video signals into the infotainment. For
inserting Audio signals either the possibly existing factory audio-AUX-
input or a FM-modulator can be used. If 2 audio sources shall be
connected to the infotainment, an additional electronic is necessary to
switch them.
Factory rear-view camera
Automatically switching-back from inserted video to factory rear-view
camera is only possible while the reverse gear is engaged. To delay the
switch-back an additional electronic part is required.
After market front camera
The front camera will automatically be switched for 5 seconds after
disengaging the reverse gear. A manually front camera switching is
possible by external keypad.
Video input signal
Only NTSC video sources compatible
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Boxes and connectors – video interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and
converts them for the video interface.
