Version 25.06.2019
HW: CAM(V98)/UP(V20)
RL4-MIB-HA
P
a
g
e
10
Disconnect the
black factory picture signal cable’s female HSD connector
(coming from the
factory monitor) at the rear-side of the head unit and connect it to the enclosed picture
signal cable’s purple coloured male HSD connector..
Connect the enclosed picture signal cable’s female purple coloured HSD connector to the male
waterblue coloured HSD connector
„TO LCD“
at the rear-side of the video interface.
Bring the metal plug insert of the video interfaces’ pre-assembled picture signal cable in the shown
position with the enclosed waterblue coloured HSD socket’s
check mark “H”
and clip both parts
together.
Save the insert-socket connection by clipping in the purple coloured locking clip.
Connect the completely locked female waterblue HSD connector to the previously become
free male waterblue coloured HSD connector of the video interface.
