Version 10.09.2019
HW:25(V31)
RL2-DVD900
P
a
g
e
5
1.3.2.
CAN box
The CAN box reads out the digital signals from the vehicle CAN bus and converts them for
the video-interface.
1.4.
Dip-switch settings at the video interface
Some settings must be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
See following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
No function
-
set to OFF
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
-
set to OFF
5
Rear-view cam type
after-market
factory or none
6
Monitor
selection
Try all possible combinations of dip 6-8 to find the best
picture (quality and size)
7
8
