Version 10.09.2019
HW:25(V31)
RL2-DVD900
P
a
g
e
1
6
2.8.
Picture settings and guide lines
The picture settings are adjusted by the 3 buttons on the video-interface. Press the MENU
button to open the OSD settings menu or to switch to the next menu item. Press UP and
DOWN change the selected value. The buttons are embedded in the housing to avoid
accidental changes during or after installation. Picture settings must be done separately for
RGB, AV1 and AV2 while the corresponding input is selected and visible on the monitor. AV2
and CAM share the same settings which must be adjusted in AV2.
Note:
The OSD menu is only shown when a working video source is connected to the
selected video-input of the video interface.
The following settings are available:
Brightness
Contrast
Saturation
Position H (horizontal)
Position V (vertical)
GVIF year
UI-CNT = activation of guide lines
Note:
If the CAN box does not support the vehicle, the guide-lines cannot be used.
Options:
All ON
: Guide lines and PDC will be
displayed.
PDC ON
: Only PDC displayed.
Guide ON
: Only Guide lines displayed.
ALL Off
: Guide lines and PDC will not
be displayed.
