Version 25.02.2022
HW: V65
CI-VL1-CCC
P
a
g
e
17
3.
Video interface operation
The interface’s external keypad can be used to switch the enabled inputs.
A
long press
(2-3 seconds) of the key switches to the next activated video input. If all inputs
are enabled the order is:
Factory video
video IN1
video IN2
factory video
…
Disabled inputs will be skipped. While switching from
Video IN1
to
Video IN2
the audio-
source will be switched too, assuming the sources have also been connected to the audio
cable.
3.1.
By white wire of the 6pin cable
Alternatively or additionally to the external keypad, the 6pin cable’s white wire can be used
to switch the enabled inputs (with +5V or+12V impulse.
