Version 25.02.2022
HW: V65
CI-VL1-CCC
P
a
g
e
10
2.4.
Connection - picture signal cable
Disconnect the factory picture signal cable’s female 10pin connector which is coming
from the head unit at the
rear side of the factory monitor
and connect it to the male
10pin HSD connector (LVDS OUT) of the video interface.
Attention:
The factory picture signal cable mustn’t be disconnected for the installation!
Connect the enclosed picture signal cable’s female 10 pin connector to the male
10pin connector of the video interface.
Connect the picture signal cable’s opposite female 10pin connector to the previously
become free male 10pin connector of the video interface.
