Naviter Oudie 2, Руководство пользователя

Страница: 30 / 185

Oudie 2 25
© 2003 - 2015 ... Naviter d.o.o.
4. Screen taps
In addition to all the above you may tap anywhere on the screen and then choose "Airspace" to quickly
access the list of airspaces at the location of the tap. With this list you can quickly change the visibility of
the airspaces or simply get an overview of what lies ahead. You can also change the properties of an
airspace such as lower or upper limit.
With this information airspace navigation should be easy and understandable even in a rather complex
airspace environment.
Read also:
. Setting up the Warnings
. Changing properties of an airspace
. Loading (multiple) airspace files
3.4 Using Thermal Assistant
Thermal assistant is a feature of Oudie 2 which should help you get centered in a lift more quickly if you
decide to follow its instructions.
Thermal assistant analyses the lift in your thermal. It calculates the average and follows how strongly the
vario values change in each circle.
It uses three ways to catch your attention:
1. You may choose between Bubbles or a
Zoomed map which shows the best part of the lift. Bubbles
are disabled by default, zooming in is enabled.
2. Thermal Assistant audio warning goes off if variance is large enough (see Settings - Thermal ).
It whistles a selected amount of seconds or degrees (see Settings - Thermal ) before the glider will
reach the same part of the circle where maximum lift was reached in the previous circle.
131
118
66
132
132