Naviter Oudie 2, Руководство пользователя

Страница: 123 / 185

Settings 118
© 2003 - 2015 ... Naviter d.o.o.
You can also copy settings from another scheme with Copy from scheme function .
8.2 Airspace
In this dialog, you can setup airspace display and Warnings.
In the Type panel you can setup how airspace is displayed. You should setup each type of airspace
separately. Choose an airspace type from the drop down list. Choose until which zoom level it is visible
from the
Zoom drop down list. By checking the Warn me check box you will be warned before entering
this type of zone. Choose whether or not a zone should be filled from the Fill drop down list. Chose a
Color for the airspace type from the drop down list. Fill transparencies could be set from 0 to 100% in
10% step.
Each airspace may be presented with its label (name). Choose until which zoom this label is visible from
the
Labels zoom drop down list.
If Fill alarmed zones is checked, airspaces for which an alarm was triggered will be colored
transparently.
If
Hide inactive zones option is checked, then an airspace zone will be hidden from the Map page
when dismissed.
If
Show airspace check box is checked, then airspace will be displayed in the Map view .
Combo box Hide airspace above enables you to exclude airspace with lower limit higher than the
62