17
Slide Recommendations
Slide Mounts
For the high-performance SUPERNOVA 10K projector, we recommend special
high-performance slide mounts, such as the AHX-slide mounts from Wess. This
slide mount provides optimal cooling, simple handling, and great performance. It is
specifically made so a slide can safely be projected over a long period of time
without damage.
When using slide mounts from other manufacturers, we recommend you use slide
mounts without glass. When glass mounts are not completely dry, they tend to
show "heat stains" on the screen. These stains usually disappear after a few
minutes, but they might damage the film, so it is best to avoid using glass mounts.
To prevent potential focus problems, always use the same slide mounts for one
tray.
Although slide damage is unlikely when following the projector instructions,
we recommend using duplicate slides instead of original slides.
Slide Production
For the production of your slides, please observe the following recommendations:
Do not project original slides. Always use copies (duplicate slides).
Use Kodak Ektachrome (6DIN) to copy your slides (e.g. Type SD 5071).
When projecting slide copies, be sure the layer containing the information is
facing the lens.
As an alternative to color images, you can show images in black and white. Ortho-
film has proven to be an ideal medium for black and white pictures. This film has
high contrast, a long life-term, and is very suitable for projections. However, some
grey tones do not show up very well. Ortho-film slides must be printed by screen
process.
If you have any questions or problems with the production of your slides, please do
not hesitate to call for assistance.
