NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 96 / 348

NAVIS NavDP 4000. Operation Manual
Figure 5.48: Parameters List
— reference systems (GPS, HPR, TW, LR);
— thrusters and propellers;
— generators;
— PLC connections.
Figure 5.49: Example of the Reference Systems State Indication
The indicators are color coded (see Figure 5.49 as an example):
– For sensors and reference systems
green — sensor (system) is in use, data is valid;
white — sensor (system) is in use in the monitoring mode;
gray — sensor (system) is not in use;
red — sensor (system) is in use, data is not valid.
– For thrusters and propellers
green — thruster (propeller) is running in normal mode;
white — thruster (propeller) is running in normal mode, but is not controlled by DP;
red — thruster (propeller) is running but not available (there is the Fault signal).
– For generators
green
— generator is connected (the breaker is closed);
gray — generator is not connected (the breaker is open).
– For PLC connection
95
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”