NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 321 / 348

Data Logging
H.2 Logging Settings on DP/IJ Stations
Logging parameters are controlled through the Operator Station application / Param View / Logging tab (see figure
H.2).
Figure H.2: The Logging Tab
H.2.1 Logging Area
Logging area of the Logging tab contains three strings:
BlackBox/Remote — displays DLS operating mode and its state;
Local
— displays local recorder state;
Data Set — displays current data set record mode.
H.2.1.1 DLS Operating Modes
The DLS operates in the following setting modes:
BlackBox — the forced continuous data recording process;
Remote — the ordinary data recording controlled by the operator.
The mode name is displayed at the first line of the tab.
In case the DLS is not installed there is no line at the tab (see figure H.3).
Status indicators (both for A and B DP control stations and for IJ station) in the “BlackBox/Remote” string have the
following coding to indicate states of DLS connection/record (excluding the Local recording state):
red — error — the record is on but failed because of disk overflow or no connection;
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
320