NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 307 / 348

DPShell Service Utility
1.8. Press “Unmount USB” item in “Services” menu.
1.9. Wait for a message “Operation ‘Unmount removable drive’ completed successfully”.
1.10. Disconnect USB flash drive from USB port.
1.11. Press “Close” button.
1.12. Your flash drive contains folder “SendToNavis”.
G.1.5 Sending Feedback Package to Navis
1.1. Copy all required Feedback Packages to USB flash drive (see Section G.1.4, page 305).
1.2. Make sure that USB flash drive contains folder “SendToNavis”.
1.3. Send all files to Navis.
G.1.6 Deleting Feedback Packages
1.1. Switch DP/IJ control computer into “Service Mode” (see Section G.1.1, page 302).
1.2. Press “Feedback” item in “Services” menu.
1.3. In “Feedback List” window:
1.3.1 If you want delete only one particular Feedback Package select it by using arrow buttons for navigation.
NOTE!
Deleting is available only for Feedback Packages being copied to USB
flash drive (with “Sent” status). If you want to delete particular feedback
package copy it to the USB flash drive.
1.3.2 Press “Delete” button.
Figure G.7: DPShell. Choice feedbacks to delete
1.3.3 New dialog will suggest you to make choice what do you want to delete (see Figure G.7):
– Sent Feedbacks;
– Selected Feedback.
1.3.4 Select required item and press “OK”. Wait for “Operation ‘Delete feedback’ completed successfully” message
will appear.
1.3.5 Press “Close” button.
1.4. Press “Done” button in “Feedback List” window.
G.1.7 DP/IJ Software Update
1.1. Unpack and install an Update Package to USB flash drive (follow individual package instructions).
1.2. Install Update Package from USB flash drive to all DP/IJ control computers for which this package is intended (see
Section G.1.8, page 307):
CC — for DP-0 class systems;
CC, IJ — for DP-1;
CCA, CCB, IJ — for DP-2.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
306