3D Cartography
23
To navigate to a new waypoint or route, you should first create the waypoint/route in
your 2D chart. Full details of how to create a route will be found in your display
handbook.
Once navigation is active, the 3D chart displays:
• The active waypoint using the same symbol as the 2D chart.
• The arrival circle of the waypoint
• The course of your route (if applicable).
REMEMBER
:
A route can only be edited using a 2D chart. Changes made on the 2D
chart are also shown on the 3D chart.
81259_1_NGC.book Page 23 Wednesday, July 27, 2005 11:51 AM
