Navini Networks, Inc.
Ripwave MX Modem User Guide
Charging the
HD-EBP
Care and
aintenance
he HD-EBP needs to be recharged when the battery is connected
d the Modem is turned on but the LED on the back
he
ating the battery has no power) or
is red (indicating the battery level is low).
To recharge the battery pack, use
only
the 12V charger that came
with the HD-EBP. Using any other charger can damage the battery.
To charge the HD-EBP, plug the 12V adapter into the 12V input
socket on the HD-EBP. Plug the other end of the adapter into an
electrical wall socket.
the Modem
s this may harm the Modem.
Note
tery
w
connected to a
Modem.
re
ation, re
wi
m
uction
Keep the Modem free of dust and moisture. If
wet, use a towel to dry it immediately.
andl
Modem gently. Dropping it or mis
cause damage to the plastic shell or the electro
away from high temperature
ag
the plast
ell or the
tronic ci
M
T
to a Modem an
of t
battery remains off (indic
Note
: Do not attempt to plug the 12V adapter into
a
: The bat
may charge hile it is
Your Modem
To ensu
is designed to give you years of trouble-free service.
oper
ad the follo ng care and aintenance
instr
s.
the Modem gets
H
e the
handling it can
nic circuitry.
Keep the Modem
s. Heat can cause
dam e to
ic sh
elec
rcuitry.
Pig-tail Cord
12V Input Socket
Plugs into
Wall Socket
30
060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)
