Navilock NL-603P, Руководство по эксплуатации

Страница: 3 / 13

2. Starting operation, e.g. with an USB adapter cable (article number 61264)
2.1. Plug the USB cable in a free USB port on your notebook etc., and connect it with the NL-
603P. The NL-603P will be recognized by your Windows operating system, which will attempt
to install a driver. Abort this process, and start “ublox5_install.exe” from the CD-ROM, or
download the driver from the Navilock website. Follow the installation instructions. After the
installation is complete, re-start your computer. Then the GPS COM port will be available in
the Device Manager under Connections. Set this port in your navigation or route planner
software. Do not use another program that accesses this port at the same time.
3. LED indicator
Flashes, with Satfix
Lights, without Satfix
3. Application environment
The NL-603P can be used as a serial GPS receiver under Windows CE/2000/XP/Vista/7, Linux
ex Kernel 2.6.x. Corresponding adapter cables can be found in the catalog on the CD-ROM and
under
www.navilock.com .
4. Functional test with u-Center 6
1.
Install the u-Center software on your unit. Select the version suitable for your system. U-
Center is a pure test program and cannot be used for navigation or orientation. It must
always be closed after the test. It blocks the COM port and does not allow any access of
the navigation or route software to the COM port. It also serves for updating the Assist
GPS data and switching to EGNOS.
If the NMEA protocol is displayed in u-Center, but you cannot find a receiver in the application
software, the connection problem is not with the receiver, but with the selected software setting.
In this case, the software manufacturer support center may be able to help you.