Navigon PNA Transonic 6000T, Руководство пользователя

Страница: 46 / 52

E
NGLISH
42
M
OUNTING THE
N
AVIGATION
S
ET ON A
B
ICYCLE
You can attach your navigation system to a bicycle as an op-
tional additional feature. A special holder is needed to do this.
The installation is explained in the following.
(similar picture)
1. Release both the screws connecting the clamp to the hold-
ing plate with the hexagon key.
2. Remove the rubber ring and wind it
around the handlebars.
3. Position the clamp on your bicycle
handlebars, by pulling it across the
handlebars from below.
4. Put the holding plate back onto the clamp and retighten
both the screws.
5. Seat the holder for the navigation system on the holder
plate until it locks into place audibly. Please pay attention to
the fact that the holder must only be seated in one direc-
tion.
6. Now place the device on the holder. You must pay attention
to firm positioning.
Holding plate
Hexagon key
Screws
Clamp