S
AFETY AND
M
AINTENANCE
31
V.
S
TARTING THE NAVIGATION SOFTWARE
Note: The memory card must always be inserted in
the device while the navigation system is being used.
It will be necessary to carry out a Soft Reset to re-
start the navigation system if the memory card has
been removed, only for a short time, while the sys-
tem was being used (see page 23). This Reset will
take place automatically, according to the navigation
system.
1.
Switch on your navigation system.
2.
The Navigation software will start automatically or after
tapping on the navigation control button on the main
screen, according to the version.
3.
Tap on Navigation on the screen for entering the destina-
tion and enter the address of your navigation destination.
Then start the navigation by clicking on “Start naviga-
tion”. You will receive the route information on the screen,
augmented by language statements, after a short time, if
the satellite reception is adequate.
Further information regarding the navigation software can be
found in the comprehensive manual on your navigation
CD(s)/DVD(s). This is a pdf-file you can read and print with the
any Acrobat Reader.
Note: The GPS-receiver will require some minutes
for initialization when deployed for the first time.
Even when GPS signal reception is indicated the
navigation could be imprecise. In all future instances
it will take about 30-60 seconds until a correct GPS-
signal is available, sufficient “sight” of the satellite is a
prerequisite.
i
i
Содержание PNA Transonic 6000T
Страница 52: ...ENGLISH 48 ...