User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live
- 44 -
Navigation
Start
►
Tap on the button of the route which you want to use for the
navigation.
If you have selected the value On Request for the Route Optimisation
setting, then you may be notified of traffic incidents before the
navigation starts (see "Route Optimisation: On Request" on page 80).
Simulating the navigation
You can also simply simulate the navigation from your current position
to a selected destination point.
Note:
GPS reception must be good enough to determine your current
position.
Note:
When simulation is in progress, the
symbol will appear
instead of the GPS symbol (see "GPS" on page 21).
You have entered a destination. The route has been calculated. The
map is open in
Route preview
mode.
1. Tap on
(More) > Simulation.
►
If the
MyRoutes
function has been activated, you will be
prompted to select a route for the simulation.
2. Tap on the button of the route on which you want to simulate the
navigation.
For more details about the
MyRoutes
function refer to the chapter
"MyRoutes" on page 43.
Stopping the simulation
Simulation is ended in the same way as navigation:
1. Tap on the map to open the button bar.
2. In the button bar tap on
(Navigation Options) or
(Navigation).
3. Tap on Stop Simulation.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."