User's manual NAVIGON 20 EASY | 20 PLUS
Switching on the navigation device
- 15 -
Calculation of the current position and its representation on the map
take place approximately once every second. In other words, your
current position is always shown on the map.
3
Switching on the navigation device
►
Press the
(
On/Off
) key and keep it pressed until the device
switches on.
The
N
AVIGATION
window opens.
Note:
The display lights up briefly in white, indicating that you have
started the device.
When you switch on the navigation system for the first time, you will be
asked to make the following settings:
►
your preferred language for using for the software
►
the unit of length for distances
►
the time format
►
the date format
Note:
When you start the navigation application for the first time, the
D
EMO
M
ODE
settings window opens.
Demo mode is intended only for demonstrating the product when no
GPS reception is possible.
When demo mode is active, navigation is not possible! Demo mode
is designed solely to simulate navigation to the centre of the
indicated destination.
►
Make sure that the Start in Demo Mode setting is at No. If
necessary tap on the
(Toggle) button in order to change
the setting from Yes to No.
►
Tap on OK.
Note:
How to deactivate demo mode is explained in "Troubleshooting"
in section "I have accidentally activated demo mode" on page 93.